Manual reset low pressure solenoid valves (normally closed)

Manual reset low pressure solenoid valves (normally closed)

Description : TYPE M16/RMBP normally closed solenoid valve. Designation : Manual reset low pressure solenoid valves. Normally closed for gas type M16/RMBP.
Certification : EC approved in accordance with EN 161, threads according to NF EN 10226, G2 filtering in accordance with EN 779
Application areas : GAS installations
Types of gas : Natural gas, manufactured gas, propane, propane-air
Operating pressure : up to 500 mbar
Operating temperature : -20 °C to +60 °C
Degree of protection : IP65
Class – Filtering : Class A Group 2 - 50 μm filtering
Voltage – Frequency : 230 V - 50-60 Hz
Available diameters : DN 15, DN 20, DN 32, DN 50

The « PLUS » :

  • Only possible to reset while energised
  • Manual reset for greater safety
  • IP 65 protection
  • Closes in less than one second
  • Can be used in zones 2 and 22 (Directive 99/92/EC annex 1)
  • Conforms to Directive 94/9/EC (use in industry)

Reset : Press down fully on the reset pin (see diagram) and wait for the pressure at the top and the bottom to equalize ("locking").

pdf_iconDownload the product form of Gas solenoid valves (PDF 473 Ko)

IN OUT Cal Maximum pressure Voltage Frequency Other References
F 1/2" F 1/2" 15 500 mbar 230 V 50-60 Hz IP 65 49033015
F 3/4" F 3/4" 20 500 mbar 230 V 50-60 Hz IP 65 49033020
F 1"1/4 F 1"1/4 32 500 mbar 230 V 50-60 Hz IP 65 49033032
F 2" F 2" 50 500 mbar 230 V 50-60 Hz IP 65 49033050